to avoid blackouts, FFR uses approved assets to quickly reduce demand or increase
generation.
FFR function decription:
Four Frequency set point descriptions：
Point-A：FFR feed in to grid End Point (Maximum feed in power)；
Point-B：FFR feed in grid Trig Point；
Point-C：FFR consumed from grid Trig Point；
Point-D：FFR consumed from grid End Point (Maximum consumed power)；
Work modes: Remote Charge mode
The battery charge and discharge can be remotely controlled through the monitoring
platform or APP.
Details of remote control:
Charge the battery only from Solar panels, and it doesn’t consume power from Grid;
Charge the battery to the maximum, and the energy both from Solar panels and the Grid;
Discharge the battery，Solar power + Battery power to inverter feed in power to the
maximum;
Charge/Discharge the battery, Solar power + Battery discharge power feed in grid (the
value can be set);
EPS Status
When the grid is off, system will supply emergency power from PV or battery to supply the
home loads. (Battery is necessary in EPS mode)
To Next Page
Loading...
