A) Grid
This status shows the real time grid condition such as voltage, current, output power and the
local consumed power. Pout measures the output of the inverter, Pgrid measures the export to or
import from the grid. Positive value means the energy feed into grid. Negative value means the
energy used from grid.
Press up and down button to review the parameter. Press” ESC” to return to status.
B) Solar
This status shows the real time PV condition of the system. The input voltage, current and power
situation of each PV input. Press up and down button to review the parameter. Press” ESC” to
return to Status.
C) Charger
This status shows the charger situation of the system. Include the battery voltage, charge or
discharge current. Charge or discharge power, battery capacity and battery temperature. “+”
means in charging; “-” means in discharging. Press up and down button to review the parameter.
Press “ESC” to return to Status.
D）EPS
EPS will only have data when the iverter is working in EPS mode, it will show the real time data
of the EPS output. As voltage , current , power, frequency. Press up and down button to review
the parameter. Press”ESC” to return to Status.
To Next Page
Loading...
