GEAR CONTROL
3
gearbox is in neutral and the drive
wheels are mechanically locked by
the driveshaft.
Ensure that the electronic parking
brake is engaged.
Maintenance period
Refer to the maintenance document
for your vehicle or consult an Ap-
proved Dealer to check whether the
automatic gearbox requires sched-
uled maintenance.
If it does not need to be serviced,
there is no need to top up the oil.
P position must only be
engaged when the vehi-
cle is stationary.
Operating faults
– When driving, if the "WARNING:
Check Gearbox" message appears
on the instrument panel, it indicates
a fault.
Contact an approved dealer as soon
as possible;
– when driving, if the "WARNING:
Gearbox Overheating" message ap-
pears on the instrument panel, stop
as soon as possible to let the gear-
box cool down and wait for the mes-
sage to disappear;
– breakdown recovery of vehicle
fitted with an automatic gearbox
🡺348.
–
For safety reasons, do
not switch off the igni-
tion before the vehicle
has come to a com-
plete standstill.
When setting off, if the lever is stuck
in P when you press the brake pedal
(e.g. battery fault), it is possible to
manually release the lever to un-
block the drive wheels.
To do this, unclip the base of the
gaiter and press the push button
8
while simultaneously pressing but-
ton
7
on the lever to unlock the lever
and shift to N position.
Contact your approved Dealer as
soon as possible;
180 - Driving
To Next Page
Loading...
