Renault CLIO 2024 - Headlight Beam Adjustment

LIGHTING AND SIGNALS
2
Operation of the fog lights depends
on the exterior lighting selected, and
an indicator light will light up on the
instrument panel.
Do not forget to switch off the fog
lights when they are no longer need-
ed, to avoid inconveniencing other
road users.
Switching off the lights
Rotate the central ring 4 again to
align the mark 3 with the symbol of
the fog lights that you wish to switch
off.
The corresponding indicator light on
the instrument panel goes out.
The front and rear fog lights switch
off when the exterior lights are
switched off.
When driving in fog or
snow, or when transport-
ing objects which are
higher than the roof, the head-
lights do not come on automati-
cally.
The fog lights are controlled by
the driver: indicator lights on
the instrument panel inform you
whether they are on (indicator
light on) or off (indicator light
off).
Headlight beam adjustment
Headlight beam adjustment
Switch A is used to adjust the height
of the headlight beams according to
the load.
With the dipped beam headlights on,
press or raise switch A as many
times as required to select the re-
quired position on the instrument
panel.
The position selected is displayed on
the instrument panel for approxi-
mately 30 seconds.
Note: depending on the vehicle,
each time the ignition is switched on,
the position selected is displayed on
the instrument panel for approxi-
148 - Getting to know your vehicle