SPEED LIMITER
3
Introduction
The speed limiter function helps you
stay within the driving speed limit
that you choose, known as the limit
speed.
Controls
1.
Start/stop speed limiter switch
.
2.
Cruise control On/Off switch
.
3.
Speed limiter activation and
speed reduction (SET/-).
4.
Speed limiter activation and
speed increase or recall of stored
limit speed (RES/+).
5.
Puts the function on standby and
stores the limited speed (O).
You can link the speed
limiter to the "Road sign
detection" function🡺236.
Driving
When a limit speed has been set but
not yet reached, driving is similar to
driving a vehicle without the speed
limiter function.
Once you have reached the stored
speed, no effort on the accelerator
pedal will allow you to exceed the
programmed speed except in an
emergency (refer to information on
"Exceeding the limit speed").
Switching on
Press switch
1
until the warning light
is displayed on the instrument panel.
The warning light is displayed
in grey on the instrument panel.
The "Limiter ON" message appears
on the instrument panel accompa-
nied by dashes to indicate that the
speed limiter function is activated
and waiting for a limit speed to be
stored.
To store the current speed, press
switch
4
(RES/+) or switch
3
(SET/-):
the limit speed replaces the dashes
and, depending on the vehicle, the
warning light appears in white.
The minimum speed that can be
stored is 19 mph (30 km/h).
Varying the limit speed
The limit speed may be changed by
pressing repeatedly or holding
down:
Driving - 241
To Next Page
Loading...
