FRONT SEATS
2
Front headrests
To raise the headrest
Press the
2
button and pull the head-
rest upwards to the height required.
Check that it is correctly locked.
To lower the headrest
Press the button
2
and guide the
headrest down to the desired height.
Check that it is correctly locked.
To remove the headrest
Raise it to its highest position (tilt the
seatback backwards if necessary).
Press the button
2
and lift the head-
rest to release it.
To refit the headrest
Check that the headrest rods are
clean
3
.
Insert the headrest rods into the
holes
1
(tilt the seatback backwards
if necessary). Lower the headrest un-
til it locks and press button
2
to ad-
just to the desired height. Check that
each rod
3
is locked on the seat-
back.
The headrest is an im-
portant safety compo-
nent: ensure that it is in
place and in the cor-
rect position. The top of your
head should be in line with the
top of the headrest. The dis-
tance between your head and
section
A
should be as short as
possible.
Front seats
To move the seat forwards or
back
62 - Getting to know your vehicle
To Next Page
Loading...
