Renault CLIO 2024 - Wiper Blades: Replacement; Replacing the Windscreen Wiper Blades

WIPER BLADES: REPLACEMENT
6
Replacing the windscreen
wiper blades 2
To replace the wipers, first put them
in the service position B .
Engine running or ignition on:
– move the stalk 1 twice in succes-
sion to position A (single sweep): the
wiper blades will stop in position B
away from the bonnet;
– lift the wiper arm 3 ;
– lower the tab 4 and remove the
blade 2 .
Refitting
To refit the wiper blade 2 , insert it in-
to its housing in the arm 3 , then clip it
until you hear a click.
Make sure that the blade is correctly
locked in position.
To return the blades to the lowered
position, make sure that the blades
are folded down onto the wind-
screen then set the stalk 1 to posi-
tion A (single sweep): the wind-
screen wiper blades will fold into the
bonnet when the ignition is switched
on.
Check the condition of
the wiper blades.
You are responsible for
their service life:
– clean the blades, windscreen
and rear screen regularly with
soapy water;
– do not use them when the
windscreen or rear screen is dry;
– free them from the wind-
screen or rear screen when they
have not been used for a long
time.
360 - Practical advice