BREAKDOWN RECOVERY
6
ing the current and then to terminal
2
(˗).
Start the engine of the vehicle sup-
plying the current and run it at an in-
termediate engine speed.
If your vehicle's engine does not
start immediately, switch off the ig-
nition and wait a few seconds before
repeating the operation.
With the engine running, disconnect
the cables
A
and
B
in the reverse or-
der (
2
-
4
-
5
-
1
).
Reposition the cover
3
of the termi-
nal
1
(+).
Ensure that there is no
contact between ca-
bles
A
and
B
and that
positive cable
A
is not
in contact with any metallic
component in the vehicle sup-
plying the current.
Risk of injury and/or damage to
the vehicle.
Remote terminals
(E-tech full hybrid version)
Use terminal
6
(+) and terminal
7
(˗)
in the engine compartment.
It is forbidden to dis-
connect the positive
cable in the engine
compartment.
Risk of the engine starting inad-
vertently.
Risk of burns by projection of
sparks.
Note: open the cover
8
of terminal
6
(+) by pressing the button
9
in the di-
rection indicated by the arrow.
352 - Practical advice
To Next Page
Loading...
