FRONT SEATS
2
|
38 - Getting to know your vehicle
Move forward or backward
Lift the lever
1
to move the seat for-
ward or backward. Release the lever
1
in desired position of seat and ensure
that the seat is fully locked into place.
To adjust the seat height
Lift the knob
2
upward to adjust the
seat height and release the knob in the
desired height.Ensure seat is locked
properly after release.
To tilt the seatback
Lift the knob
3
upward to unlock reclin-
er mechanism.Tilt the seat back to de-
sired position and release knob. En-
sure seat back is locked properly after
release.
For safety reasons, carry
out any adjustments
when the vehicle is not
being driven.
We would advise you not to re-
cline the seatbacks too far to en-
sure that the effectiveness of the
seat belts is not reduced.Nothing
should be placed on the floor
(area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
To Next Page