EXTERIOR LIGHTING AND SIGNALS
2
Getting to know your vehicle - 81
|
Side lights
Turn the end of stalk
2
until the
symbol is opposite mark
1
.
Dipped beam headlight
Depending on the vehicle, turn
the end of stalk
2
down until the sym-
bol is opposite mark
1
.
Main beam headlights
With the dipped beam head-
lights lit, push down stalk
3
. The indi-
cator on instrument panel comes on.To
return to dipped headlight,pull the stalk
3
upward.
Switching off the lights
Turn the end of stalk
2
until the
symbol is opposite mark
1
.
Headlight flasher : Pull stalk
3
to-
wards you to flash the headlights.
Daytime running lights function
(front lights only)
If fitted on the vehicle, the daytime run-
ning lights come on automatically with
no action on stalk, when the engine is
started and they go off once the engine
is switched off. When the position func-
tion is ON, the daytime running lights
are switched off.
Depending on the variants,
Automatic lighting of head-
lights will comes ON only in
ENGINE ON condition.