WINDSCREEN WASHING / WIPING
2
Getting to know your vehicle - 85
|
Windscreen Wiper
With the ignition on, move the
stalk
1
around the steering wheel (de-
pending on the version) :
A.
One time Mist removal function.
B.
Park ;
C.
Intermittent wiping (depends on ve-
hicle version) - The wiper will pause for
several seconds between sweeps.
D.
Normal wiping speed.
E.
Fast wiping speed.
Windscreen washer
With the ignition on, pull the
stalk
1
towards you.
A brief pull will trigger a single sweep
of the wipers, in addition to the wind-
screen washer.
A longer pull will trigger three sweeps
of the wipers, in addition to the wind-
screen washer.
When working in the en-
gine compartment, en-
sure that the windscreen
wiper stalk
1
is in the
B
position (park). Risk of injury.
In frosty weather, make
sure that the wiper blades
are not stuck by ice (risk of
motor overheating).
Keep an eye on the condition of
the blades. They should be re-
placed as soon as they become
less efficient.
This will occur approximately
once a year. Clean your wind-
screen regularly.
If you switch off the ignition before
switching off the windscreen wiper
(position A) the blades will stop at
random on the windscreen.
After switching the ignition back
on, simply move stalk 1 to posi-
tion
B
to place them in the park
position.
Before any action on the
windscreen (washing the
vehicle, de-icing, clean-
ing the windscreen, etc.),
return stalk
1
to position
B
(park).
Risk of injury and/or damage.