EXTERIOR LIGHTING AND SIGNALS
2
Side lights
Turn the end of stalk
2
until
the symbol is opposite mark
1
.
Dipped beam headlight
Depending on the vehicle, turn
the end of stalk
2
down until the
symbol is opposite mark
1
.
Main beam headlights
With the dipped beam head-
lights lit, push stalk
2
. The indicator
on instrument panel comes on.To re-
turn to dipped headlight,pull the
stalk
2
upward.
Switching off the lights
Turn the end of stalk
2
until
the symbol is opposite mark
1
.
Daytime running lights func-
tion (front lights only)
If fitted on the vehicle, the daytime
running lights come on automatical-
ly with no action on stalk, when the
engine is started and they go off
once the engine is switched off.
When the position function is ON, the
daytime running lights are switched
off.
Headlight flasher: Pull stalk
2
to-
wards you to flash the headlights.
|
50 - Getting to know your vehicle
To Next Page