Renault KWID 2025 - Rear Seats

REAR SEATS
4
To fold the backrest
Before folding down a seatback:
– Lower the headrest fully.
– During folding, left and right seat
belts must be positioned and seat
belts should be buckled to the cush-
ion buckles in order to protect seat
belt jamming between seat back
and latch.
– Hold straps B and C and pull them
together to unlatch the seatback.
– Hold the seatback and pull down
towards A ,
Refitting the seatback
– Lower the headrest fully.
– During unfolding left and right
seat belts must be positioned and
seat belts should be buckled to the
cushion buckles in order to protect
seat belt jamming between seat
back and latch.
– Push the seatback toward D and
ensure both latches locked properly
Allow the seatback turn
on its axis naturally with-
out forcing it, guiding it as
it lowers onto the seat base.
When moving the rear
bench seat, ensure that
nothing obstructs the
anchorage points (part
of the body, a pet, gravel, cloth,
toys, etc.).
When refitting the
seatback, make sure it
is correctly locked in
place.
If seat covers are fitted, make
sure these do not prevent the
seatback latch from locking in.
Make sure that the seat belts
are positioned correctly.
Check that the rear seat belts
are positioned and operating
correctly each time the rear
seat is moved.
Never allow anyone to ride in
the luggage area or on second
row seat when it is in the fold-
down position. Use of these ar-
eas by passengers without
proper restraints could result in
serious injury in an accident or
sudden stop.
Properly secure all luggage to
help prevent it from sliding or
shifting. Do not place luggage
higher than the backrest.
When operating the backrest,
be careful not to scratch or
damage seat belts.
Your comfort - 93
|