WINDSCREEN WASHING / WIPING
2
WindscreenWiper
With the ignition on, move the
stalk
1
around the steering wheel
(depending on the version):
A
One time Mist Removal Function.
B
Park.
C
Intermittent wiping (depends on
vehicle version) - The wiper will
pause for several seconds between
sweeps.
D
Normal wiping speed.
E
Fast wiping speed.
Windscreen Washing
With the ignition on, pull stalk
1
towards you(depending on the ver-
sion).
A brief pull will trigger a single sweep
of the wiper, in addition to the wind-
screen washer.
A longer pull will trigger multiple
sweeps until the release of stalk
1
in
addition to the windscreen
washer.Once the stalk is released,
there will be three sweeps of the
wiping and one additional sweep af-
ter a few seconds.
Before any action on
the windscreen (wash-
ing the vehicle, de-ic-
ing, cleaning the wind-
screen, etc.), return stalk
1
to po-
sition
B
(park).
Risk of injury and/or damage.
When working in the
engine compartment,
ensure that the wind-
screen wiper stalk
1
is
in the
B
position (park). Risk of
injury.
If you switch off the ignition before
switching off the windscreen wiper
the blade will stop at random on the
windscreen. After switching the igni-
tion back on, simply move stalk
1
to
position
B
to place them in the park
position.
Getting to know your vehicle - 53
|