Renault KWID 2025 - TRIP COMPUTER: General Information

TRIP COMPUTER: GENERAL INFORMATION
2
Trip computer 1
The display depends on the vehicle
and the country.
Scroll through the following informa-
tion by pressing the button 2.
a) Total distance recorder.
b) Trip distance recorder.
c) Fuel Used in Litre (from last reset).
d) Average Fuel Consumption (from
last reset).
e) Current Fuel Consumption.
f) Estimated Fuel range (DTE - dis-
tance to empty).
g) Distance travelled from Last re-
set.
h) Average speed from the Last Re-
set.
Resetting the trip mileage
To reset the trip mileage recorder,
the display must show the Trip me-
ter function.
Press and hold button 2 .
Interpreting some of the val-
ues displayed after resetting
The values showing average fuel
consumption, range and average
speed will become more stable and
reliable the further you travel after
pressing the reset button.
For the first few kilometres after
pressing the reset key you will notice
that the range increases as you trav-
el. This range takes into account the
average fuel consumption since the
last time the reset button was
pressed.
Refer to the table on the following
pages showing display examples.
The current fuel consumption may
decrease when,
– the vehicle stops accelerating.
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed).
– when driving from an urban area
onto the open road.
Resetting is automatic when the
maximum capacity of any of the
memories is exceeded.
|
48 - Getting to know your vehicle