Renault TWINGO - Rear Bench Seat: Functions

banquette arrière ...................................... (jusqu’à la fin de l’UD)
3.33
ENG_UD1384_1
Banquette arrière : fonctionnalité (X44 - Renault)ENG_NU_773-1_X44_Renault_3
Banquette arrière : fonctionnalités
The seat and the seatback may be
folded away to allow large objects to be
transported.
To raise the seat
Before handling the bench seat, ensure
the seat belt catches
1 are attached
to the corresponding buckles
2 and
ensure the front seats are far enough
forward.
From the front, lift the seat base
3
against the front seats (movement A).
To fold down the seatback
From the luggage compartment, pull
straps
4 either side of the bench seat,
and lower the seatback.
To raise the seatback,
proceed in reverse order.
Refit the seatback and click it back into
place.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
REAR BENCH SEAT: functions
To fold away the seat,
proceed in reverse order.
Position the rear bench seat cushion in
such a way so as to position the rear
section of the seat base under the seat-
back.
Check that it is correctly locked in po-
sition.
3
1
2
4
4
When moving the bench
seat, ensure that the seat
belt catches are correctly
locked in position.
When the bench seat has been put
back in place, make sure that it is
correctly locked and the seat belts
are correctly repositioned.
A