aide au parking ......................................... (jusqu’à la fin de l’UD)
2.26
ENG_UD1367_1
Aide au parking (X44 - Renault)ENG_NU_773-1_X44_Renault_2
Aide au parking
PARKING DISTANCE CONTROL
Operating principle
Ultrasonic sensors, fitted in the vehi-
cle’s rear bumper, measure the dis-
tance between the vehicle and an ob-
stacle when reversing.
This measurement is indicated by
beeps which become more frequent the
closer you come to the obstacle, until
they become a continuous beep when
the vehicle is approximately 30 centi-
metres from the obstacle.
There is a beep when changing to re-
verse gear.
Note: make sure that the ultrasonic
sensors are not blocked (by dirt, mud,
snow, etc.).
Operating faults
When the system detects an operating
fault there will be a 5-second, continu-
ous warning beep when reverse gear
is selected. Contact your RENAULT
Dealer.
This function is an addi-
tional aid that indicates the
distance between the vehi-
cle and an obstacle whilst
reversing, using sound signals.
Under no circumstances should it
replace the driver’s care or respon-
sibility whilst reversing.
The driver should always pay at-
tention to sudden incidents during
driving: always ensure that there
are no moving obstacles (such as a
child, animal, pram or bicycle, etc.)
or small, narrow objects such as
stones or posts in your path when
manoeuvring.
To Next Page
Loading...
