Renault TWINGO - Roof Bars

barres de toit ............................................ (jusqu’à la fin de l’UD)
galerie
barres de toit ....................................... (jusqu’à la fin de l’UD)
3.39
ENG_UD1388_1
Barres de toit (X44 - Renault)ENG_NU_773-1_X44_Renault_3
Barres de toit
ROOF BARS
Accessing the mounting
points
Open the doors. Behind seal 2 are
blanking bolts
1 which protect the
mounting bolt locations.
When fitting roof bars, at the front of the
vehicle, replace the blanking bolts with
the mounting bolts supplied with the
roof bars. Behind seal
3, position the
roof bars in the reinforced area
4 pro-
vided.
For information on the range of
equipment adapted to your vehi-
cle, we advise you to consult your
RENAULT Dealer.
Refer to the fitting instructions for in-
formation on how to fit roof bars and
conditions of use.
Please keep these instructions with
the rest of the vehicle documenta-
tion.
Maximum permissible load on
roof rack: refer to the information
on “Weights” in Section 6.
Never remove blanking
bolts 1 without plugging the
holes afterwards.
Once they are secured on
to the vehicle, the mount-
ing bolts should never be
removed (risk of damaging
the vehicle).
Only bolts supplied with RENAULT
roof bars should be used to fit the
roof bars onto the vehicle.
1
2
3
4