balais d’essuie-vitres ................................ (jusqu’à la fin de l’UD)
5.9
ENG_UD3068_1
Balais d essuie-vitres (X44 - Renault)ENG_NU_773-1_X44_Renault_5
Balais d’essuie-vitres
WINDSCREEN WIPER BLADES
Refitting a front or rear wiper
blade
To refit the wiper blade, proceed in re-
verse order to removal.
Make sure that the blade is correctly
locked in position.
Replacing windscreen wiper
blades 1
– Lift the windscreen wiper arm 3 as
far as it will go (the arm does not lift
up completely);
– press button
2 and slide the wiper
blade sideways to release hook
4 on
the wiper arm.
Replacing rear screen wiper
blade 6
– Lift wiper arm 5;
– pivot the blade until some resistance
is met;
– remove the blade by pulling it.
Before using the wipers,
check that no objects are
obstructing the travel of the
blades.
– In frosty weather, make sure that
the wiper blades are not stuck by
ice (risk of motor overheating).
– Check the condition of the wiper
blades. Replace the wiper blades
as soon as they begin to lose ef-
ficiency (approximately once a
year).
3
1
2
4
5
6