catalyseur ................................................. (jusqu’à la fin de l’UD)
Particularité des véhicules essence ......... (jusqu’à la fin de l’UD)
pot catalytique .......................................... (jusqu’à la fin de l’UD)
2.4
ENG_UD1354_1
Particularités versions essence (X44 - Renault)ENG_NU_773-1_X44_Renault_2
Particularités des versions essence
SPECIAL NOTES ON PETROL VERSIONS
The following operating conditions:
– Driving for long periods when the low
fuel level warning light is lit;
– using leaded petrol;
– using lubrication or fuel addi-
tives which are not approved by
RENAULT.
Or operating faults such as:
– Faulty ignition, running out of fuel or
disconnected spark plugs resulting
in the engine misfiring or cutting out
when driving;
– loss of power,
may cause the catalytic converter to
overheat, reducing its efficiency
which
may irreparably damage it and cause
heat damage to the vehicle.
If you notice any of the above operat-
ing faults, have the necessary repairs
carried out as soon as possible by your
RENAULT Dealer.
These faults may be avoided by taking
your vehicle regularly to your RENAULT
Dealer at the intervals specified in your
Maintenance Service Booklet.
Starting problems
To avoid damaging the catalytic con-
verter, do not keep trying to start the
engine (using the start button, or by
pushing or towing the vehicle)
without
having identified and corrected the
starting fault.
If the fault cannot be identified, do not
continue to try and start the engine, but
contact a RENAULT Dealer.
Do not park the vehicle or
run the engine in locations
where combustible sub-
stances or materials such as
grass or leaves can come into con-
tact with the hot exhaust system.
To Next Page
Loading...
