2.22
ENG_UD1366_1
Boîte de vitesses Quickshift (X44 - Renault)ENG_NU_773-1_X44_Renault_2
Operation
Switch on the ignition.
The display on the instrument panel
switches on. If neutral (
N) is displayed,
start the engine but do not depress the
accelerator.
If a gear other than neutral (
N) is dis-
played, it will flash; starting is possi-
ble if you depress the brake pedal
(indicator light
4 will come on if you
forget) when holding the key in the
starting position.
The gear will automatically change to
neutral (N) and the engine will start.
You may also select neutral after switch-
ing on the ignition by pushing the lever
to the right whilst depressing the brake
pedal.
When the engine is running, automatic
mode will be selected by default.
Note: if the display does not light up
when the ignition is switched on (dis-
charged battery), do not attempt to start
the engine by pushing the vehicle.
Starting
The display shows N (neutral) and A
(automatic mode).
Moving off forwards:
– With the brake pedal depressed,
push the selector lever forwards and
release it (the number 1 will appear
on the display);
– release the brake pedal and acceler-
ate gently to move forwards.
Reverse gear:
– With your foot on the brake pedal,
push the selector lever towards the
right and backwards, and then re-
lease it.
Reverse gear is engaged (letter
R
appears on the display).
– release the brake pedal then ac-
celerate gently to move backwards.
The engine idle speed is sufficient
for parking manoeuvres.
When the vehicle is stationary, push
the selector lever towards the front to
engage a forwards gear.
Shifting to neutral
With the brake pedal depressed, push
the lever to the right.
Note: when the vehicle is stationary,
you must depress the brake pedal to
engage or disengage a gear. Otherwise,
warning light 4 will light up.
QUICKSHIFT GEARBOX (continued)
4
The oil level in the automatic gearbox system reservoir is variable depending on use. Adding oil is strictly forbidden
(except by qualified RENAULT Network personnel).