Need help?Do you have a question about the Renishaw Tonic and is the answer not in the manual?
General| Brand | Renishaw |
|---|---|
| Model | Tonic |
| Category | Media Converter |
| Language | English |
Device compliance with FCC Rules, subject to two conditions for operation.
Product compliance with EC directive 2002/95/EC.
Classification of the readhead as a Class 1 LED product.
Information on correct disposal of electrical and electronic equipment (WEEE).
Visual instructions for correct and incorrect handling of the encoder system.
Lists suitable and unsuitable solvents for cleaning system components.
Defines temperature and humidity limits for operation and storage.
Detailed dimensions and tolerances for the DSi unit in mm.
Diagram showing connector pinouts, LED, and propoZ button locations.
Summary of steps for installing and calibrating TONIC DSi encoders.
Critical step of setting the head orientation switch for correct function.
Steps to calibrate the DSi for full or partial arc rotation.
How to initialize the DSi after power-up or errors.
Illustrates local and remote mounting methods for the TONIC DSi.
Procedure for calibrating the DSi system, including propoZ button use.
Procedure for initializing the DSi after power-up or errors, including IN-TRACT feature.
Steps to re-program the propoZ reference (index) position using the button.
Actions required after reprogramming, including controller restart and re-initialisation.
Information on adhesive covers for protecting buttons from dust.
Explanation of DSi LED colors and their corresponding meanings and states.
Detailed pinout and signal assignments for the DSi's 26-pin connector.
Key parameters like power supply, sealing, acceleration, shock, vibration, and mass.
Specifies maximum allowable cable lengths for readhead to interface and interface to DSi connections.
Diagrams and notes on proper grounding and shielding for reliable operation.
Diagram showing how to connect the power supply to the DSi unit.
To Next Page
