Renkforce RF-4818888 - Page 32

30
New Password
Enter your new password.
Confirmed
Password
Confirm your new password.
Management IP
IP Address
Specify an IP address here. This IP address will be assigned to your unit.
Subnet Mask
Input the subnet mask of the new IP address.
Gateway Address
Input the network’s gateway IP address.
DNS
Enter the DNS address here.
DHCP Server
DHCP Server
Enable or disable the DHCP server.
Default Gateway
Input the network’s gateway IP address.
Start IP
Enter the start IP address for the DHCP server’s IP address leases.
End IP
Enter the end IP address for the DHCP server’s IP address leases.
Lease Time
Select a lease time for the DHCP leases here. The DHCP client will obtain a new
IP address after the period expires.