Renkforce RF-4818888 - Wireless Advanced

21
V-5 Wireless Advanced
Using the “Advanced Setting” menu, you can configure security, MAC filtering and various other
settings.
The settings on the “Advanced Setting” page shown below are for experienced users only. Please do
not change any of the values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of your access point.
Fragment
Threshold
Set the Fragment threshold of the wireless radio. The default value is 2346.
RTS
Threshold
Set the RTS threshold of the wireless radio. The default value is 2347.
Beacon
Interval
Set the beacon interval of the wireless radio. The default value is 100.
DTIM
Period
Set the DTIM period of wireless radio. The default value is 3.
Data Rate
Set the wireless data transfer rate. The default is set to auto.
N Data Rate
Set the data rate of 802.11n. The default is set to auto.
Channel
Width
Select wireless channel width (bandwidth used by wireless signals from the device) – the
recommended value is Auto 20/40MHz.