Renogy 2000W User Manual

13
2.Make note of the AC output terminals from left to right (Ground, Live, Neutral) and the AC
Input terminals from left to right (Neutral, Live, Ground).
1.Remove the AC Terminal block
WARNING
The AC input must never be connected to the AC output as irreversible overload or
damage may result
WARNING
AC Output should NEVER be connected to public power or a generator
Automatic Neutral-to-Ground Bond Switching
CAUTION
Be careful of the positive and negative poles. Reversing the poles might cause
permanent damage to the inverter. It will surely blow the internal fuse.
Damage to the Renogy inverters due to reverse polarity is NOT covered by warranty.
NOTE
OUTPUT
AC OUTPUT AC Input
L N
INPUT
LN

Renogy 2000W Specifications

General

Continuous Power	2000W
Surge Power	4000W
Input Voltage	12V DC
Output Voltage	120V AC
Output Waveform	Pure Sine Wave
Output Frequency	60Hz
THD	<3%
Operating Temperature Range	-4°F to 104°F (-20°C to 40°C)
Protection	Overload, Over Temperature, Short Circuit
Efficiency	90%
USB Port	5V/2.1A
Under Voltage Protection	10V DC