8
Additional Components
Remote Temperature Sensor (TS-R): Measures the
temperature at the battery and uses this data for very accurate
temperature compensation. It is not polarity sensitive.
USB to RS-485 Converter: The USB to RS-485 converter is
used to monitor each controller on the network using Solar
Station Monitor PC software and update the firmware. It connects
to the RS-485 port on the controller. Download the PC software
through Renogy’s website under the “Downloads” section
Optional Components
Optional components that require a separate purchase:
External Battery (RTC): Allows for the access to the charge controller’s saved settings,
charge accumulation, and discharge accumulation without connecting to a deep cycle
battery. It keeps track of the date/time (once set) for automatic equalization processes.
To Next Page
Loading...
