Renogy ROVER Series User Manual

28
Status
White
Solid
Off
The Controller is undergoing boost stage
The Controller is undergoing float stage
The Controller is undergoing equalization stage
Status
White Solid
Off
System Error. Please check LCD for Error code
Off
System is operating normally
Status
White Slow Flashing
White Single Flashing
White Fast Flashing
White Double Flashing
White Solid
White Fast Flashing
White Solid
White Fast Flashing
White Slow Flashing
Status
The PV system is charging the battery bank
The oversized PV system is charging the battery
bank at the rated current.
Battery over-voltage
Battery over-discharged
Battery is normal
Load is on
Load is over-loaded or short-circuited
Load is off
LOAD Indicator (3)
BATT Indicator (2)
ERROR Indicator (4)
PV Indicator (1)
The PV system is not charging the battery bank.
PV not detected.

Renogy ROVER Series Specifications

General

Temperature Compensation	-3mV/°C/2V(Default)
Type	MPPT
Nominal System Voltage	12V/24V Auto
Rated Charge Current	20A, 30A, 40A, 60A
Max PV Input Voltage	100V (20A/30A), 150V (40A/60A)
Max Solar Input Power	260W (12V)/520W (24V) for 20A, 390W (12V)/780W (24V) for 30A, 520W (12V)/1040W (24V) for 40A
Battery Type	Sealed, Gel, Flooded, Lithium
Communication	RS232
Protection	Over Heating