08
Additional Components
Optional Components
Additional components included in the package:
Optional components that require a separate purchase:
This sensor measures the temperature at the battery and uses this data for
very accurate temperature compensation.The sensor is supplied with a
9.8ft cable length that connects to the charge controller.Simply connect the
cable and adhere the sensor on top or the side of the battery to record
ambient temperature around the battery.
The BT-1 Bluetooth module is a great addition to any Renogy charge
controllers with a RS232 port and is used to pair charge controllers with the
Renogy BT App. After pairing is done you can monitor your system and
change parameters directly from you cell phone or tablet. No more
wondering how your system is performing, now you can see performance
in real time without the need of checking on the controller’s LCD.
These brackets can be used to mount the Rover charge controller on any
flat surface. The screws to mount the brackets to the charge controller are
included, screws to mount charge controller to surface are not included.
NOTE
Do Not use this sensor when charging lithium battery.
Renogy BT-1 Bluetooth Module:
Remote Temperature Sensor:
Mounting Brackets:
The DM-1 4G Module is capable of connecting to select Renogy charge
controllers through an RS232, and is used to pair charge controllers with
Renogy 4G monitoring app. This app allows you to conveniently monitor
your system and charge system parameters remotely from anywhere 4G
LTE network service is available.
Renogy DM-1 4G Data Module:
Mounting Oval: 7.66 x 4.70mm(0.30 x 0.18in)
To Next Page
Loading...
Need help?
General
