Reolink Argus 2 Operational Instruction

• Camera is not powering on
If you find your camera is out of work, please
try the following solutions:
• Make sure the battery is correctly inserted
into the compartment. If not, put the battery in.
• Charge the battery using the power adapter
of DC 5V2A and make sure the battery
indicator LED is on. When the green light is
illuminated, the battery is fully charged.
• If you have another spare battery, please
swap the battery for a double check.
• If the camera still can’t be powered on after
trying the troubleshooting steps above,
contact Reolink support team.
If the PIR sensor fails to trigger any kind of
alarm within the covered area, try the
following solutions:
• Make sure that the PIR sensor or the camera
is installed in the direction crossing the
possible intruder.
• Make sure the PIR sensor is enabled or the
time schedule is on and set properly.
• Please check the sensitivity and make sure
it’s set properly.
• Go to Device Settings -> PIR Settings and
make sure the corresponding action is
checked.
• Make sure the battery is not deployed.
• Please reset the camera and try it again.
If you fail to receive any push notification when
motion is detected, try the following solutions:
• Make sure the push notification has been
enabled.
• Make sure the PIR schedule is set properly.
• Check the Internet connection of your phone
and try again.
• Make sure the camera is connected to the
Internet. If the LED indicator under the camera
lens is solid red or flickering red, it means that
your device has disconnected from the
Internet.
• Make sure you’ve enabled notifications on
your phone. Go to the System Settings of your
phone and allow it to push notifications.
• Unable to receive push
notification
• PIR sensor fails to trigger
alarm
Troubleshooting
17English16 English
• Remove the Camera
Step 1
Press the security mount
button to pull the mount out.
Step 2
Unscrew the camera from the
wall mount.

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g