EasyManuals Logo
Home>Reolink>Security Camera>Argus 2

Reolink Argus 2 Instruction Manual

Reolink Argus 2
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Unable to receive push notification
If you fail to receive any push notification when motion is detected, try the following solutions:
Make sure the push notification has been enabled.
Make sure the PIR schedule is set properly.
Check the Internet connection of your phone and try again.
Make sure the camera is connected to the Internet. If the LED indicator under the camera lens is solid red or
flickering red, it means that your device has disconnected from the Internet.
Make sure you’ve enabled notifications on your phone. Go to the System Settings of your phone and allow it to
push notifications.
Specifications
Video
Video resolution: 1080p HD at 15 frames/sec Field of View: 130° diagonal Night Vision: Up to 10 m (33 ft)
PIR Detection & Alerts
PIR Detecting Distance: Adjustable up to 9m (30ft)
PIR Detecting Angle: 120° horizontal
Audio Alert: Customized voice-recordable alerts
Other Alerts: Instant email alerts and push notifications
General
Operating Frequency: 2.4 GHz
Operating Temperature: -10° to 55° C (14° to 131° F)
Weather Resistance: IP65 certified
weatherproof
Size: 96x58x59 mm
Weight (Battery included): 260 g (9.2 oz)
(Argus 2)/ 230g (8.1 oz) (Argus Pro)
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired
operation. For more information, visit:
https://reolink.com/fcc-compliance-notice/.
Simplified EU Declaration of
Conformity
Reolink declares that this device is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.
Correct Disposal of this product

Other manuals for Reolink Argus 2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Reolink Argus 2 and is the answer not in the manual?

Reolink Argus 2 Specifications

General IconGeneral
TypeIP security camera
Placement supportedIndoor & outdoor
Connectivity technologyWireless
Form factor-
WeatherproofYes
Mounting typeDesk/Wall
Product colorBlack, White
Protection featuresFreeze resistant, Heat resistant, Waterproof
Total megapixels2 MP
Maximum resolution1920 x 1080 pixels
Video compression formatsH.264
Minimum illumination0 lx
Sensor typeCMOS
Optical sensor size1/2.8 \
Compatible memory cardsMicroSD (TransFlash)
Night vision distance10 m
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life0.5 year(s)
Battery voltage3.63 V
Battery capacity5200 mAh
Power source typeBattery
Battery technologyLithium
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-10 - 55 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 85 %
Mobile operating systems supportedAndroid, iOS
Number of cameras1
Detection angle120 °
Detection distance9 m
Security algorithmsWEP, WPA-PSK, WPA2-PSK
Weight and Dimensions IconWeight and Dimensions
Depth59 mm
Width65 mm
Height119 mm
Weight350 g

Related product manuals