Sensitivity
Detecting Distance
(For moving and living things)
Detecting Distance (For moving vehicl
es)
Low Up to 4 meters (13ft) Up to 10 meters (33ft)
Mid Up to 6 meters (20ft) Up to 12 meters (40ft)
High, Up to 9 meters (30ft) Up to 15 meters (50ft),
NOTICE:
1. Path for adjusting distance in App: Device settings-PIR settings
2. Path for adjusting distance in Client: Device settings-RF Alarm
3. Higher sensitivity offers a longer detecting distance, but it would lead to more false alarms. You are advised to
set up the sensitivity level to “Low” or “Mid” when you install the camera outdoors.
Important Notes for Reducing
False Alarms
To reduce false alarms, please note that:
Do not install the camera facing any objects with bright lights, including sunshine, bright lamp lights, etc.
Do not place the camera too close to a place where there are frequently moving vehicles. Based on our
numerous tests, the recommended distance between the camera and the vehicle is 15 meters (50ft).
Stay away from the outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of
projectors, etc.
Do not install the camera where there are strong winds.
Do not install the camera facing the mirror.
Keep the camera at least 1 meter away from any wireless devices, including Wi-Fi routers and phones in order
to avoid wireless interference.
PIR Sensor Installation Angle
When installing the camera, please install the camera angularly (the angle between the sensor and the
detected object is larger than 10°) for effective motion detection. If the moving object approaches the PIR
sensor vertically, the sensor may not detect the motion events.
To Next Page
Need help?
General
Weight and Dimensions
