Reolink Argus 2 User Manual

Reolink Wireless Battery-powered Camera
114
·Test the camera with another phone or computer.
·At last, contact Reolink Support with the camera’s UID for further help:
https://support.reolink.com/.
7. The Camera Shows “Incorrect Password”
When add the camera or connect the camera’s video, it shows incorrect password,
please follow the below solutions.
If you still have a phone or computer that can access the camera, please directly
restore the device via the software. After restore, you can create a new password.
·For Reolink App, go to camera Settings>Advanced page, click Restore.
·For Reolink Client, go to camera Settings>System> Maintenance, click Restore.
If currently no device has access to the camera, you have to reset it by press the
reset button on the camera. Then set up the camera again from the start.
Please find the detailed steps about reset in this article: How to Reset Reolink
Devices.

Reolink Argus 2 Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Form factor	-
Weatherproof	Yes
Mounting type	Desk/Wall
Product color	Black, White
Protection features	Freeze resistant, Heat resistant, Waterproof
Total megapixels	2 MP
Maximum resolution	1920 x 1080 pixels
Video compression formats	H.264
Minimum illumination	0 lx
Sensor type	CMOS
Optical sensor size	1/2.8 \
Compatible memory cards	MicroSD (TransFlash)
Night vision distance	10 m
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Battery life	0.5 year(s)
Battery voltage	3.63 V
Battery capacity	5200 mAh
Power source type	Battery
Battery technology	Lithium
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-10 - 55 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 85 %
Mobile operating systems supported	Android, iOS
Number of cameras	1
Detection angle	120 °
Detection distance	9 m
Security algorithms	WEP, WPA-PSK, WPA2-PSK

Weight and Dimensions

Depth	59 mm
Width	65 mm
Height	119 mm
Weight	350 g