Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
114
·Test the camera with another phone or computer.
·At last, contact Reolink Support with the camera’s UID for further help:
https://support.reolink.com/.
7. The Camera Shows “Incorrect Password”
When add the camera or connect the camera’s video, it shows incorrect password,
please follow the below solutions.
If you still have a phone or computer that can access the camera, please directly
restore the device via the software. After restore, you can create a new password.
·For Reolink App, go to camera Settings>Advanced page, click Restore.
·For Reolink Client, go to camera Settings>System> Maintenance, click Restore.
If currently no device has access to the camera, you have to reset it by press the
reset button on the camera. Then set up the camera again from the start.
Please find the detailed steps about reset in this article: How to Reset Reolink
Devices.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm