Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
2
The screenshot used in this user manual is based on model Arugs 3 Pro. The menu and
options of your model may be different, please refer to the actual page of your own model.
1. Camera Introduction
Device Overview
Argus 2/Argus Pro
A Rechargeable battery and Wi-Fi connectivity make the camera totally wire-free.
No network or power cable, no drilling and no outlets needed. Security is simple.
You can put it anywhere you want: on a shelf or a table; at the front door or back
door; from room to room, to keep an eye on the elderly, babies or pets. Or use it at a
temporary construction site, rental house or holiday house.
1
Daylight Sensor
2
6 PCS IR LEDs
3
Lens
4
Status LED
5
Built-in Mic
6
Built-in PIR Motion Sensor
7
Speaker
8
Wall Mount
9
Rechargeable Battery
10
Micro SD Card Slot
11
Reset Hole

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm