Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
38
4.Alarm and Detection
Set up Motion Detection
About PIR Detection
Reolink battery-powered Wi-Fi cameras use PIR sensors (passive infrared sensors)
to detect motion.
The PIR sensor detects changes in the amount of infrared radiation impinging
upon it, which varies depending on the temperature and surface characteristics of
the objects in front of the sensor. When an object, such as a human, passes in front
of the background, like a wall, the temperature at that point in the sensor's field of
view will rise from room temperature to body temperature, and then return again.
The sensor converts the resulting change in the incoming infrared radiation into a
change in the output voltage, which triggers the detection. Objects of similar
temperature but different surface characteristics may also have a different infrared
emission pattern, thus moving them with respect to the background may trigger
the detector as well.
Turn on/off PIR
On the Devices page of the Reolink App, choose the camera and then directly tap
on PIR button to quickly turn on or turn off the PIR motion detection.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm