Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
18
Attach the Camera to a Tree
Remove the Camera
Magnet (for Argus 2 only)
Thread the provided
strap to the mounting
plate.
Fasten the mounting
plate to a tree.
Follow the steps 3-5 in
the wall mounting to
finish installation.
Press the security mount
button to remove the
mount out.
Unscrew the camera from
the security mount.
Put up the skin,
provided in the packa
ge, for Reolink
Argus 2 camera.
There is an anti-falling
Safety rope. Please fasten
the other end of the rope
to the wall mount when
mounting it into a wall.
Stick the camera to the
wall mount and twist
the camera to adjust
direction.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm