Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
17
Once the initially setup is completed, you may choose a good position to
mount your camera.
Install the Camera
Here take model Argus 2/Argus Pro as example to demonstrate the steps. The
mounting instructions of other models can be found on it’s Quick Start Guide here:
https://reolink.com/download-center/
Mount the Camera to the Wall
Press the button to
release the plate from
the security mount.
Screw the security mo
unt plate into the wall.
Lock the security mou
nt on its plate. (Make
sure the top edge of
the plate is inserted int
o the mount.)
Press the security mount
button until its plate
clicks into the mount.
Screw the camera, adjust
Its mangle and tighten
the knob to lock it.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm