Reolink Argus 3 User Manual

Reolink Wireless Battery-powered Camera
12
Note:
1. Please power on the camera by power switch button before initial setup.
(Suits for Argus PT, Argus Eco, Argus 3, Argus 3 pro.)
2. If you are not sure whether you hear the right sound, you may tap "Demo" to
hear the sample sound. If you couldn't hear the repeated Ding sounds, please reset
your camera.
Step 2. Tap on the icon in the top right corner to start the initial setup.
Step 3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap Input UID/IP and then manually type in the UID (16-digit characters
under the QR code of the camera).
Note: You may tap Light to enable flash light when setting up in a dark
environment.

Reolink Argus 3 Specifications

General

Field of View	120°
Audio	Two-Way Audio
Weatherproof	IP65
Wireless Standard	IEEE 802.11b/g/n
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Dimensions	121 x 90 x 56 mm
Resolution	2K (4MP)
Power Source	Rechargeable battery or solar panel
Connectivity	Wi-Fi (2.4GHz)
Image Sensor	CMOS Sensor
Video Resolution	2560 x 1440
Infrared Night Vision	Up to 10 meters (33ft) (IR LED)
Color Night Vision	Yes
PIR Detection Distance	Up to 10 meters
PIR Detection Angle	100°
Wireless Security	WPA-PSK/WPA2-PSK
Battery	5200mAh Rechargeable Battery
Power	Solar panel compatible
Local Storage	microSD card (up to 128GB)
Storage	Micro SD card
Motion Detection	PIR motion detection
Weight	330g
Lens	Fixed Lens, f=2.8mm