Reolink E1 User Manual

Reolink Wireless Camera
User Manual
7
3. Scan the QR code on the back of the camera. If the phone doesn't respond,
please tap Input UID/IP and then manually type in the UID (16-digit characters
under the QR code of the camera).
Note: You may tap Light to enable flash light when setting up in a dark
environment.
4. Select Wi-Fi Not Configured. If you hear the camera speaking “Please run App,
add the camera and set it up” or the ding sounds, please tick “I have heard the
voice prompt from the camera” or “I have heard ding sounds from the camera”,
then tap Next.

Reolink E1 Specifications

General

Pan & Tilt	355° Pan, 50° Tilt
Audio	Two-way audio
Storage	microSD card slot (up to 128GB)
Image Sensor	1/2.7" CMOS Sensor
Wireless Standard	IEEE 802.11b/g/n
Wireless Security	WPA-PSK/WPA2-PSK
Ethernet	No
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Weight	200g
Motion Detection	Yes
Resolution	2304x1296 (3MP)
Night Vision	40 ft (12m)
Connectivity	Wi-Fi
Power	DC 5V/1A
IR Distance	40 ft (12m)
Day/Night Mode	Auto-switching
Viewing Angle	Horizontal: 87.5°, Vertical: 47°, Diagonal: 100°