Reolink E1 User Manual

Reolink Wireless Camera
User Manual
72
2. Here you can check the camera’s basic information such as camera model and
UID. And check System Info section about its firmware information.
Device Password
To access and use camera, a password is required. The default username is admin
and password is blank (no password). When you set up the camera for the first
time, it’ll ask for creating a password before you can access the camera.
Change Device Password
1. Launch Reolink App and tap settings icon > Advanced > Change Device
Password.
Device name
Camera name
Model
camera model No.
UID
starts with 9527xxxxxxxx
Storage
SD card storage
Network Info
Camera IP address
Firmware Ver
camera firmware version

Reolink E1 Specifications

General

Pan & Tilt	355° Pan, 50° Tilt
Audio	Two-way audio
Storage	microSD card slot (up to 128GB)
Image Sensor	1/2.7" CMOS Sensor
Wireless Standard	IEEE 802.11b/g/n
Wireless Security	WPA-PSK/WPA2-PSK
Ethernet	No
Operating Temperature	-10°C to 55°C (14°F to 131°F)
Weight	200g
Motion Detection	Yes
Resolution	2304x1296 (3MP)
Night Vision	40 ft (12m)
Connectivity	Wi-Fi
Power	DC 5V/1A
IR Distance	40 ft (12m)
Day/Night Mode	Auto-switching
Viewing Angle	Horizontal: 87.5°, Vertical: 47°, Diagonal: 100°