Reolink Go

Reolink 4G Battery-Powered Camera
User Manual
85
Allow and Continue: This will allow for counting your battery consumption data for
the past 4 weeks.
You can also check the battery level and charging status from Devices page.
Device Password
To access and use a camera, a password is required. The default username is
admin and password is blank (no password). When setting up the camera, it’ll
ask for a password before you can access the camera.
Change Device Password
1. Launch Reolink App and tap Settings > Advanced > Change Device
Password.
low battery level below 15%
15%-30%
30%-100%
fully charged
connected to charger
connected with solar panel