Reolink Go User Manual

Reolink 4G Battery-Powered Camera
User Manual
10
Activate the SIM Card for the Camera
The SIM card shall support WCDMA and FDD LTE.
Activate the card on your smartphone or with your network carrier before inserting
it into the camera.
Notes:
• Some SIM cards have a PIN code, please use your smartphone to disable the PIN
first.
• Do not insert the IoT or M2M SIM card into your smartphone.
3. Install the SIM Card
Reolink Go/Reolink Go Plus
1. Remove the back cover by rotating counterclockwise and insert the SIM card
into the slot.
2. Insert the battery into the camera and tighten the back cover to power on the
camera.

Reolink Go Specifications

General

Type	IP security camera
Day/night mode	Yes
Placement supported	Outdoor
Connectivity technology	Wireless
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.264
Camera pan control	-
Minimum illumination	- lx
Field of view (FOV) angle	110 °
Night vision distance	10 m
Digital zoom	6 x
DC output current	2 A
DC output voltage	5
Power source type	Battery, DC
Built-in HDD	No
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	64 GB
Operating temperature (T-T)	-10 - 55 °C
Number of cameras	1
Sensor type	CMOS
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP65

Weight and Dimensions

Length	133 mm
Weight	380 g
Diameter	75 mm