Reolink 4G Battery-Powered Camera
User Manual
Set up Motion Recording
When the camera detects a motion, it can record and save motion recordings to
the SD card automatically. You need to install an SD card to the camera, refer to
the part of SD Card Storage in Chapter 10 for choosing the correct SD card and
learn how to insert the SD card.
Set up Motion Recording
1. Tap on . Then tap on Camera Recording, tap again to enable it.
2. Tap Schedule to set up a schedule when you want the camera to save motion
recordings, then tap Save. This is only applicable for Reolink Go PT Plus and
Reolink Go Plus and you can also choose the Detection Type: Person, Vehicle or
Others.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
