!
!
1.5
Mounting a Trinity-300 unit
A Trinity-300 unit should preferably be mounted in location that
allows the unit to be placed high above interfering objects like
buildings and trees. Radio masts often provide the best
mounting conditions, but when mounting radio equipment with
other wireless systems in the vicinity you should always be
careful as sufficient isolation between your antenna and other
antennas/equipment has to be secured.
If it is not possible to mount the equipment in a mast, it could
also be mounted on roof tops, walls etc.
Note The Trinity units should be mounted with their antennas
having a clear line of sight and free Fresnel Zones between them!
For more reading on this topic, please refer to Repeatits
Deployment Guideline.
Observe the antenna polarization and make sure they match
at
both installation sites. If the sites are configured with different
polarizations, the link will be subject to strong signal
degradation.
Use the supplied mounting kit to securely mount the units at
both locations, make sure the mounting brackets are connected
to ground.
Tip Do not tightly secure the unit and/or antenna until the
antenna
alignment process in complete.
!
To Next Page
Loading...