REPLIGEN XCell ATF10 User Manual

XCell
TM
ATF System with C410:V4B Controller User Guide
101
1.10 Create Signals
In the Delta V Slot, create a “New Profibus Signal”
1.11 Create a Real datatype tag
For a REAL tag to be read from the XCell™ ATF controller, select the Data Type: Floating Point.
“Standard network Byte order” should be checked for Siemens to provide the correct endian
order for Delta V.

REPLIGEN XCell ATF10 Specifications

General

Brand	REPLIGEN
Model	XCell ATF10
Category	Laboratory Equipment
Language	English