Why is my REPLIGEN Spectrum KR2i process ending early or late in DV or CF auto modes?
If your REPLIGEN Laboratory Equipment process is ending prematurely or belatedly in DV or CF auto modes, the input for the holdup volumes may be incorrect. Ensure you enter the correct feed holdup and permeate holdup volumes, and accurately specify whether they are empty or full when initiating the process.
What to do if REPLIGEN Spectrum KR2i Laboratory Equipment process ends early when using Conductivity or UV for auto modes?
If the REPLIGEN Laboratory Equipment process terminates prematurely when utilizing Conductivity or UV for auto modes, it may be due to the sensor not being completely filled with the appropriate liquid. The conductivity sensor should be filled with the same buffer as the sample at the start of the process. Likewise, the UV sensor should be zeroed using the same buffer the sample is in.
How to fix wrong pressure sensor readings on REPLIGEN Spectrum KR2i?
If the pressure sensor readings on your REPLIGEN Laboratory Equipment are incorrect, displaying either -9.9 psi or >35psi when there is no pressure applied, it may indicate a malfunctioning pressure sensor octopus cable or a broken pressure sensor. You should replace the Octopus Cable and/or the pressure sensor.
Defines hazard and safety symbols used throughout the manual for risk identification.
Detailed technical parameters and performance specifications for the KR2i system.
Detailed technical parameters and performance specifications for the KMPi system.
Technical details for the KONDUIT accessory, including environmental and compliance data.
Explanation of the function and connection of Octopus Cables for system components.
Initial steps for setting up the TFF system, including connecting components.
Step-by-step instructions for configuring the system in Manual Mode.
Guide for configuring TFF system settings via the KF Comm software interface.
Procedures for configuring hardware parameters and system settings.
Details on controlling the TFF system's pump functions and modes.
General overview of TFF system functions, pump modes, and auxiliary actions.
In-depth explanations of how to operate various TFF pump modes.
Procedures for starting and running a TFF system application.
Technical specifications for KR2i and KMPi pump heads and associated tubing.
Step-by-step instructions for installing and operating KR2i pump heads.
Instructions for installing and operating KMPi pump heads.
Guide for installing and connecting auxiliary scales to the TFF system.
Instructions for installing and configuring auxiliary peristaltic pumps.
Setup, operation, and settings for automatic backpressure valves.
Overview of the KF Comm Software Suite and its compatibility.
Guide for installing and updating TFF system software and firmware.
Overview of the tools available within KF Comm for data collection.
Explanation of the concentration principle in Tangential Flow Filtration.
Explanation of the diafiltration process and its role in TFF.
General| Brand | REPLIGEN |
|---|---|
| Model | Spectrum KR2i |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
