REPLIGEN Spectrum KR2i User Manual

12 400-12355-000 Rev. 03
KR2i / KMPi TFF Systems
System Configuration and Major Components
a later version of the same standard
incorporating the same level of testing requirements.
(For CE Mark):
EN61010-1: (EU Low Voltage Directive) and
EN61326: (EU EMC Directive)
System Configuration and Major Components
4.1 Pump Drive, Pump Head, & Integrated Pressure Monitor
The TFF system comes with the Digital Pressure Monitor integrated into the Pump Drive as one unit.
The internal microprocessor runs both the Pump and Pressure monitor functions.
4.2 Mounting Hardware
The KMPi TFF system comes with the Easy-Load Pump Head that requires no extra hardware to
mount. The KR2i TFF system comes with an attached mounting plate for the KMPi Easy-Load Pump
Head.
4.3 Octopus Cables
The TFF system comes with two Octopus Cables—one with more pins for the Auxiliary Components,
and one with less pins for the Pressure Transducers. On the back of the TFF system are two Interface
ports for the Octopus Cables.
System Parts List
KR2i TFF System
Part Number Pump Description
SYR2-U20 Complete KR2i System
SYR2-U10 KR2i Pump Drive, Head, and Stand Only
System Parts List:
Part Description Quantity
KrosFlo® Research 2i Pump Drive w/ Integrated Pressure Monitor 1
KrosFlo KF Comm Software Suite (on USB) 1
Auxiliary Component Octopus Cable 1
Pressure Transducer Cable 1
Power Supply Cable 1
KrosFlo® Research II Easy-Load Pump Head 1
KMPi TFF System
Part Number Pump Description
SYR2-U20 Complete KMPi System
SYR2-U10 KMPi Pump Drive and Head Only

REPLIGEN Spectrum KR2i Specifications

General

Brand	REPLIGEN
Model	Spectrum KR2i
Category	Laboratory Equipment
Language	English