Checking and replacing your parts regularly
It is important for your comfort and health that you check and replace your parts and supplies
regularly. Replacing your parts and supplies on a regular basis helps ensure you are receiving optimal
therapy and continued comfort.
Refer to your AirCurve 10 User Guide for detailed instructions on checking your device. Contact your
care provider for information on your replacement schedule.
Replacement schedule guide:
Every Month Every 3 Months Every 6 Months
Mask cushion or pillow Mask frame
(excludes headgear)
Headgear
Air filters Air tubing Water tub
Register today
myAir™ allows you to access your therapy data and provides personalized support.
Every journey starts with a first step. Register today at ResMed.com/myAir
Serial number Device number
Mask type and size Date of setup
Notes
Water tub for humidification
Dial for navigating and changing options
Home button for returning to the
Home screen at any time
Start/Stop button for starting therapy
Quick start guide
English
LED alarm indicator to alert you to
changes that may affect treatment
ResMed Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
Distributed by
ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA
ResMed (UK) Ltd 96 Jubilee Ave Milton Park Abingdon Oxfordshire OX14 4RW UK
See Resmed.com for other ResMed locations worldwide. AirCurve, ClimateLine and HumidAir are trademarks and/or registered trademarks of the
ResMed family of companies. For patent and other intellectual property information, see ResMed.com/ip. © 2015 ResMed Ltd. 288334/1 2015-11
288334 AirCurve 10 ST-A PQSG AMER Eng_2.indd 1-2 23/11/2015 10:51:38 AM
To Next Page
Need help?
General
