Need help?Do you have a question about the ResMed AirCurve 10 ST-A and is the answer not in the manual?
General| Device Type | Bi-level positive airway pressure (BiPAP) device |
|---|---|
| Pressure Range | 4 to 30 cm H2O |
| Ramp | Yes |
| IPAP Pressure Range | 4 to 30 cm H2O |
| EPAP Pressure Range | 4 to 25 cm H2O |
| Ramp Time | 0 to 45 minutes |
| Noise Level | 26 dBA |
| Altitude Adjustment | Automatic |
| Modes | ST |
| Humidification | Integrated HumidAir heated humidifier |
| Data Management | SD card |
| Power Supply | 100-240V, 50/60Hz |
| Operating Altitude | Up to 8, 500 ft |
| Therapy Modes | ST |
| Ti Control | 0.3 to 3 seconds |
| Rise Time | 1 to 6 |
| Display | LCD |
| Data Recording | Comprehensive data including usage, AHI, leak, and more |
To Next Page
