What to do if I have a ResMed airsense 10 autoset Medical Equipment air leak from mask seal with nose or face?
If you're experiencing an air leak from the mask seal around your nose or face while using ResMed Medical Equipment, try tightening the headgear, but not too tight. If you are using nasal pillows or a full face mask, consider switching to a nasal triangle mask.
What to do if I have a ResMed airsense 10 autoset air leak through mouth?
If you're experiencing air leaking through your mouth while using ResMed Medical Equipment, try adding a chin strap. If the chin strap doesn't solve the problem, consider switching to a full face mask that covers your mouth, assuming there are no contraindications.
How to fix dry mouth / nasal dryness with ResMed airsense 10 autoset Medical Equipment?
If you are experiencing dry mouth or nasal dryness while using ResMed Medical Equipment, consider adding a chin strap, as this could suggest a mouth leak. You might also consider increasing the humidifier setting.
What to do if ResMed airsense 10 autoset mask is uncomfortable?
If your ResMed Medical Equipment mask is uncomfortable, try adjusting the headgear to improve the fit. Loosen the headgear just enough to prevent leaks around the edges of the mask. If the problem persists, consider switching to a different mask type or model.
What to do if I have nose stuffiness using ResMed airsense 10 autoset?
If you're experiencing nose stuffiness while using ResMed Medical Equipment, try increasing the humidification. Also, consider using a chin strap, as congestion can occur if you're leaking air through your mouth. A full face mask might also be an option, assuming there are no contraindications.
What to do if I am not getting enough air with ResMed airsense 10 autoset?
If you feel like you're not getting enough air with your ResMed Medical Equipment, turn Ramp off. If EPR is on, turn it off.
Why do I have condensation in mask/tubing with ResMed Medical Equipment?
If you're experiencing condensation in the mask or tubing of your ResMed Medical Equipment, increase the tube temperature setting by one or two degrees. You might also consider lowering the humidifier setting.
What to do if I feel too much pressure with ResMed airsense 10 autoset?
If you're experiencing too much pressure with your ResMed Medical Equipment, first determine if a leak is a factor. Then, verify that Ramp is in Auto.
Why is it hard to exhale using ResMed airsense 10 autoset Medical Equipment?
If you're having difficulty exhaling while using ResMed Medical Equipment, verify that EPR is turned ON and set to 3. Also, verify that Ramp is ON.
What to do for Facial Sensitivity / Desensitization with ResMed airsense 10 autoset Medical Equipment?
If you're experiencing facial sensitivity or desensitization while using ResMed Medical Equipment, consider switching to a less obtrusive mask. For example, try a nasal mask instead of a full face mask, or nasal pillows instead of a nasal triangle mask.
General| Device Type | CPAP Machine |
|---|---|
| Brand | ResMed |
| Model | AirSense 10 AutoSet |
| Therapy Modes | CPAP, AutoSet |
| Pressure Range | 4-20 cm H2O |
| Ramp | Yes |
| Humidification | Integrated HumidAir Humidifier |
| Data Storage | SD card |
| Ramp Time | 0 to 45 minutes (5-minute increments) |
| Heated Tubing | Optional ClimateLineAir heated tubing |
| Climate Control | Yes |
| Display | LCD color display |
| Weight | 2.75 lbs (1.248 kg) |
| Power Supply | 100-240V AC, 50-60Hz |
To Next Page
